Designers MC Squared asked us to design, manufacture and install two canopies located at the 02 Arena for their client Brandwidth. One tensile canopy consisted of an inverted cone fitted to the underside of the existing services towers. The other was a freestanding conical canopy supported on a central mast and perimeter tripods.
Our scope of works included the membranes, supporting steel and fittings including the cables to support climbing ivy.
The transformation of the service tower was visually dramatic and enhanced the very popular venue. The client went on to propose additional structures on the site and at other venues.
Large advertising hoardings are not everyone’s cup of tea but in terms of sheer scale this one takes the biscuit! At over 6000m2 of roadside advertising area, this project was widely lauded as the largest Out Of Home opportunity available in the UK at that time. Sitting adjacent to the main arterial route from the M60 into Manchester and exposing full frontal glory to the new City of Manchester Stadium, this is one bill board that is impossible to ignore. Exposure was even claimed for airline passengers on the flight path into Manchester Airport!
During the planning application process our client had to guarantee to the Gas-o-meter owners Transco, that clothing the structure would in no way detract from it functioning as originally intended. Therefore prior to receiving approval, extensive structural engineering calculations were produced which predicted that by wrapping the skeletal steel frame within a web of suitably tensioned stainless steel cabling the structure would not deflect sufficiently to stop the rise and fall of the gas chamber within. Thankfully the calculations were spot on and the resulting fully clothed gas holder continued performing unhindered and as unabashed as it had when naked!
An additional USP of this site was that the cable net devised for carrying these super large printed banners allowed for quick, 8-hour removal and re-installation of the media so that a pair of eyes seeing it on the way to work in the morning would be exposed to a different campaign on the way home in the evening. Striking visibility has always been the life blood of the advertising industry.
The British Institute of Technology & E-commerce (BITE) is one of the largest private higher education institutes in the UK. Covering two buildings and neighbouring the 2012 Olympic Park and Westfield Stratford City, BITE’s Stratford campus adjoins areas that have seen some of the most significant regeneration in London in recent years. In keeping with the values and ambitions of both the institute and the burgeoning area, BITE approached Base seeking an architecturally functional feature for the entrance of their Romford Road building.
After consultation it was decided to opt for the cost effective option of a standard fabric canopy that could provide the maximum value for their budget. One of our pre-designed canopies, Jura was selected, as a suitable canopy that could be positioned to abut the entrance of the building and provide effective protection from the elements. The tensile fabric canopy provides far more than simple shelter however, architecturally signposting the entrance to the rectangular, archetypal office building with great aplomb.
Fire rated PVC coated polyester fabric with a weldable PVDF lacquer supported by a mild steel frame, coated with a two-pack polyurethane paint system, ensures this entrance feature will look great for many, many years to come. An integrated drainage system also allows rainwater to be channelled away out of sight within the steelwork.
All in all a fitting adornment to the campus of a pioneering educational institute!
We were asked to build a circus tent for a new development at Bioscope Leisure Park in Alsace, France, called the Learning Zone. This colourful fabric structure provides a fun and interactive learning environment.
Our scope of works included the design and manufacture of the PVC fabric tent, steelwork and associated fittings. We also supervised and helped our client with the installation.
At the Bezier development in Old St London, Tudorvale developments wanted to work with us to deliver a brand new, state of the art sports facility for the local community. The multi-use games area is primarily a five-a-side football court, but is also suitable for other activities such as netball. The MUGA is used by the local school on a daily basis and a requisite of the specification was for all weather use to be available.
Whilst the high tech synthetic pitch materiel takes care of business down below, the translucency afforded by the Verseidag tensile fabric enables best use of external light. To top things off, the high spec 100% PVDF lacquer provides maximum protection for the PVC fabric from the airborne pollution emanating from the busy inner ring road nearby.
On what was a congested site run to a tight program, Base Structures customer focussed approach ensured that the large steel members were installed promptly and with minimum disruption to the rest of the site. Coordination with other trades was a premium marker on this project, as Tudorvale’s Jon Thompson comments:
“I would highly recommend Base. The Bezier project was a success for all concerned. Base were a pleasure to work with. Always helpful. No politics or mind games. Just straight talking advice, which you know is backed by years of experience.”
A re-mountable pavilion was required for events in the garden of an English manor house that could be erected and dismantled when needed. Base were approached to create a custom built, fully engineered, re-mountable tensile fabric pavilion of the highest quality to replace an existing marquee.
Rectangular in plan sitting on a paved base, the temporary pavilion measures 36m long by 14m wide and over 5m high with an undulating fabric roof consisting of six conic forms, each topped with a golden finial.
The front wall of the pavilion is entirely made up of sliding glazed doors to offer perfect views of the garden and the landscape beyond from anywhere inside the pavilion, not to mention flooding the interior with light.
We were commissioned to design, manufacture and install a scheme of fabric architecture to flow seamlessly through the Bentley Bridge Retail Park and would give shoppers that wow factor.
At 1,300sqm, the tensile fabric multi-cone entrance is one of the largest single-piece tensile membranes in the UK. It simply defines the building. The detail in the design is both intricate and precise. Five bold white cone structures are tensioned by a web of cables and rigging, locked into the building by a series of steel parapet posts. An additional 450 linear metres of fabric creates an elegant series of link walkways throughout the park, effortlessly nestling the entrance canopy in its fabulous context.
Architecturally, the retail park delivers a stunning first impression that almost commands you to stop, stand back and take notice.
To compliment the stunning new multi-million pound conference facility with panoramic views of the South West’s most historic city, Bath Racecourse needed a tensile fabric solution that could offer an al fresco experience for its large rooftop viewing gallery and bar.
A twin cone design was proposed to not only provide an essential function of protecting the rooftop terrace, but also act as a prominent landmark for the racecourse.
The tensile fabric canopy provided three main challenges, including the sheer size of the cones at 36m x 16m and the rooftop location. The final challenge included the high exposure of the site to gusting winds. Not only were the structural demands resolved, but we also ensured that all the rainwater would be collected to avoid any discomfort to the racegoers below.
The Langridge Grandstand boasts an exclusive area overlooking the finish line of the racecourse with unrivalled trackside viewing, while the fabric canopy graciously acts as a stunning backdrop for conferences and other events.
Following the closure of the famous Barry Island holiday camp in the 1990’s, much of the site was developed into housing. With a desire to regenerate the area and grow the number of visitors once again, a £3.3m project began in 2012 to give the seaside promenade a much needed face lift. The 4.7 acre site was turned into a mix of restaurants and cafes with a cinema, bowling alley, 124 flats and rows of beach huts. And what better way to compliment this new development, than an architectural embellishment including multiple tensile fabric canopies.
A bespoke, asymmetrical inclined single conic structure stands proud on the seafront, providing essential protection from the heat of the Barry Island sun (and perhaps the occasional rain). A row of six 1P600 Chiltern standard fabric canopies also adorn the seafront, elegant single post umbrella structures that will be permanently ‘up’, rain or shine, no matter what the weather throws at the Welsh coastline.
The site was officially handed over to the Council in December 2014 with Councillor Lis Burnett commenting, “Hopefully now Barry Island can become the jewel in the crown of the Vale that we always knew it could be.”
Working for APCOA parking this attractive tensile fabric canopy is our latest installation at Terminal 5 Heathrow and forms a colourful addition to the APCOA hire car return area, functioning as an inspection area for the return of prestigious hire vehicles. The standout feature of this canopy is the printed sidewalls produced by Printable Industrial Canvas whose high-tech systems enable a 10 year warranty on the print work.
With Christmas round the corner we executed the project to a tight budget and timescale to ensure the canopy was successfully in place ready for the inevitable Christmas rush at Heathrow. Our client Philip Wills, Technical Services Project Manager from APCOA Parking commented “I would be very happy to recommend Base Structures UK”.
in Bristol
